Search Results: “” — Page 1
Now showing all 2 search results
J.H. Green; C. Beesley; C. The and S. Podger
Rare design rainfalls for probabilities less frequent than 1% Annual Exceedance Probability (AEP) are an essential part of spillway adequacy assessment as they enable more accurate definition of the design rainfall and flood frequency curves between the 1% AEP and Probable Maximum events.Learn more
Estimates for rare design rainfalls were previously derived using the CRC-FORGE method which was developed in the 1990s. However, as the method was applied on a state-by-state basis, there are variations in the approach adopted for each region. Differences in the cut-off period for data, the amount of quality controlling of the data undertaken, the base used for the 2% AEP estimates, gridding settings and smoothing processes have created inconsistencies which are particularly apparent in overlapping state border areas.
The Bureau of Meteorology has derived new rare design rainfalls for the whole of Australia using the extensive, quality-controlled rainfall database established for the new Intensity-Frequency-Duration (IFD) design rainfalls. These data have been analysed using a regional LH-moments approach which is more consistent with the method used to derive the new IFDs and which overcomes the limitations of the spatial dependence model in the CRC-FORGE method. In particular, the selection and verification of homogenous regions and the identification of the most appropriate regional probability distribution to adopt relied heavily on the outcomes of the testing of methods undertaken for the new IFDs. However, to focus the analysis on the rarer rainfall events, only the largest events have been used to define the LH-moments.
Keywords: Rare design rainfalls; Intensity-Frequency-Duration (IFD); Annual Exceedance Probability
J.H.Green, C.Beesley, C.The, S.Podgerand, A.Frost
The ability to estimate design rainfalls for probabilities rarer than 100 years or 1% Annual Exceedance Probability (AEP) is an essential part of dam hydrology. The earliest means of estimating rare events consisted of a pragmatic curve fitting procedure between the 50 and 100 year design rainfalls and the Probable Maximum Precipitation. In the 1990s a more rigorous method of estimating design rainfalls as rare as 2000 years was developed – the Cooperative Research Centre – FOcussed Rainfall Growth Estimation (CRC-FORGE) method. CRC-FORGE estimates were derived for Victoria in 1997 followed progressively by each of the other states. Over the subsequent two decades CRC-FORGE estimates were an integral part of the risk assessment of large dams – being used to determine the AEP of the Dam Crest Flood.
The Bureau of Meteorology will soon release new rare design rainfall estimates for probabilities to 2000 years. The new rare design rainfalls are a significant improvement on the CRC-FORGE estimates as they have been derived using up to date data; contemporary analytical techniques and a method that is consistent across Australia.
However, there are differences between the CRC-FORGE estimates and the new rare design rainfalls. These differences do not constitute a systematic change to the CRC-FORGE estimates but rather vary with location; duration and probability. The results of a detailed comparison between the CRC-FORGE estimates and the new rare design rainfalls are presented together will an assessment of the possible impacts on previous estimates of the AEP of the Dam Crest Flood.Learn more