Search Results: “” — Page 1
Now showing all 2 search results
Chris Topham, Andrew Pattle, David Tanner, Oliver Giudici
Many owners around the world have dams that rely on grouted, post-tensioned rock anchors for stability. The anchors were installed during the original construction of the dams or retrofitted to improve stability during their operational life. The use of fully grouted post-tensioned anchors spanned the period of the 1960’s to 1980’s. The main issue with these un-sheathed grouted rock anchors is the question of integrity of the grout column protecting the anchor and concerns about possible corrosion of the high tensile wires from which the cables are constructed. While some of these anchors have corrosion monitoring systems installed, it is difficult to validate such data and there is considerable uncertainty over the condition of such anchors. To compound the problem, replacement of the anchors is technically complex, extremely costly and difficult to justify in the absence of known condition. For example, Hydro Tasmania has recent experience of work to cease reliance on such anchors at Catagunya Dam that cost $41m in 2009. With fifteen dams relying on some form of post-tensioned anchors, Hydro Tasmania has recently taken the unusual step of over-coring and extracting three post-tensioned rock anchors from operating dams in order to assess their condition. In what is believed to be a world first, a 42m long 70 strand high tensile anchor was overcored and removed from Meadowbank Dam in 2014. A further two anchors were successfully extracted from Repulse Dam in 2015, in conjunction with a group of international sponsors with similar anchors. This paper uses the 2015 work to illustrate the methodology used to extract the anchors, outlines the information gained from this unusual work, and presents the results of the condition of the extracted anchors. The paper concludes with some inferences for other owners with similar anchors and suggestions for further work.Learn more
Keywords: Grouted, post-tensioned rock anchor, ground anchor, corrosion, over-coring, extraction, dam safety.
Gavan Hunter, Andrew Pattle and Mark Foster
A piping incident occurred during first filling of Rowallan Dam, Tasmania in 1968. The incident occurred at the interface of the embankment with the spillway wall, a 15 m high near vertical wall, where the contact earthfill eroded into the single stage downstream filter. Repairs were undertaken in 1968/1969 and the reservoir has operated largely without incident since.Learn more
A risk assessment in 2009 identified that piping through the embankment at the spillway wall interface remained a significant dam safety risk. Investigations in 2010 encountered cracking within the earthfill core at the spillway wall interface.
Dam safety upgrade works were undertaken in 2014/15 to address the piping failure mode at the spillway walls and also within the upper portion of the embankment. The works required excavation down to a rock foundation at depths up to 18 m adjacent to the spillway walls and this excavation provided an unusual opportunity to closely examine active piping features that had been preserved when interim repairs in 1968/69 had arrested the progression of piping. The repair comprised reconstruction of a significant portion of the embankment at the spillway and the reconstruction of the upper 7 m of the crest, which included dual filters downstream of the earthfill core.
The findings from the forensic investigations of the deep excavations adjacent to the right spillway wall are described in this paper along with a summary of finding from the 1968/69 repair works and a discussion of the piping mechanism at the spillway wall. The paper also covers the design and construction of the repair work. The focus of this paper is on advancements in our understanding of piping risk arising from the Rowallan Dam work.
In conclusion, (i) the upgrade works successfully reduced the dam safety risk of Rowallan Dam; (ii) the findings support the methodologies of the piping toolbox; (iii) the case study provides insight into filtering and crack filling mechanisms that have a broader implication for estimating the risks of internal erosion within existing dams; and (iv) the findings support the assessment of the low residual risks for piping through the embankment away from the upgrade work areas (crest reconstruction and spillway walls).
Keywords: Earth and rockfill embankment, piping incident, piping mechanism, dam safety upgrade.