Search Results: “” — Page 1
Now showing all 3 search results
N. Vitharana, G. McNally, C. Johnson, A. Thomas, K. Dart and P. Russell
Millbrook Reservoir is an offline storage with an earthen embankment dam containing a puddle clay core and a moderately sized upstream catchment. The dam is 31m high and has a capacity of 16.5 GL when the storage water level is at the Full SupplyLevel (FSL). The reservoir is 25km NE of Adelaide on Chain of Ponds Creek, a tributary of the River Torrens. The dam was constructed during the years 1914-1918. Earthworks were carried out only during summer as the five winters during the construction period were very wet.
Dam safety reviews and geotechnical investigations, undertaken between 2001 and 2004 by SKM, showed that these winter recesses would have created weak layers, increasing the potential for piping due to the lack of a filter. This was highlighted by the large deformations which occurred at the end of construction in 1918. The spillway was assessed as able to pass a flood event with AEP of 1:1,300,000. Given the location of the dam, ANCOLD(2000b) Guidelines suggest the dam should be able to safely pass the PMF flood event. Accordingly, the dam required upgrading to modern guidelines.
The 2005 detailed design of the upgrade included the construction of a 70m wide unlined spillway, construction of filters on the downstream face of the dam with a stabilisation (weighting) fill, installation of instrumentation and seismic protection of the outlet tower. The construction of these works is currently underway.Learn more
M. Tooley, N. Anderson, N. Vitharana, G. McNally, C. Johnson and D. Moore
There is a significant stock of aging concrete dams in Australia which would not meet the requirements of the current recognised dam safety practices applicable to concrete gravity dams.Learn more
In this paper, field and laboratory investigations undertaken for two concrete gravity dams are presented, these being Middle River Dam and Warren Dam both owned and operated by the South Australian Water Corporation. The field investigations included a comprehensive drilling program recovering core samples ranging in diameter from 61mm (HQ) to 95mm (4C), continuous imaging (RAAX) of the drilled holes and installation of piezometers. Geological logging of the holes and mapping of the unlined spillway were also undertaken. The laboratory program included the testing of concrete lift joints and concrete samples in direct tension, shear and compression.
Concrete in Middle River Dam is suffering from extensive Alkali Aggregate Reaction (AAR), and consequently a suite of laboratory testing is being undertaken to determine the current level of deterioration and residual reactivity so that potential future AAR-induced expansion can be incorporated into any upgrade design solution.
The main purpose of the study is to determine whether site-specific parameters can be used to re-assess the stability of these two dams as calculations, based on the current standards, have shown that the dams have exceeded the allowable factors of safety values at the storage water levels experienced to date.
The findings may be useful to dam designers and owners faced with the upgrading of concrete dams, where traditional assumptions can result in no upgrade or an upgrade costing several million dollars.
C.Johnson, D.Stephens, M.Arnold and N.Vitharana
As part of Melbourne Water’s dam safety upgrade program, emergency release capacity is being investigated at a number of dams. Recent work undertaken by the Water Resources Alliance (WRA) for Melbourne Water has highlighted the lack of current Australian guidelines for appropriate emergency release capacity. With no relevant ANCOLD Guidelines, current practice still references the 1990 USBR guidelines which relate the length of time to empty a reservoir to the hazard and risk associated with dam failure. As hazard category assessment criteria has been improved since and dam design and safety standards are more stringent, the applicability of the USBR criteria in today’s environment is under consideration.Learn more
With the prevailing climatic conditions requiring the augmentation of Melbourne’s water supplies, the Tarago Reservoir was recently brought back into service. However, the dam lacked adequate emergency and environmental release capacity, with this being critical to manage construction flood risk for a pending filter raising project. Through an analysis of recorded inflow data, it was evident the existing scour facility had insufficient capacity to handle the recorded inflows, and would not be able to maintain the reservoir at an appropriate level during the proposed works. The length of time to empty the reservoir for the existing scour facility and the preferred scour upgrade option were calculated and it was found that by providing a new 1200mm scour facility, USBR emptying times were met or exceeded. The enlarged outlet capacity was also required to meet the new environmental flow requirements for the dam.
The paper will review international guidelines, share the experience of several Australian water authorities in assigning emergency release capacity for their dams, and discuss the specific work undertaken to provide suitable emergency release capacity at Tarago Reservoir for Melbourne Water.