ANCOLD 2021 Tailings Dam Operators Forum
The ANCOLD 2021 Tailings Dam Operators Forum was held in Gladstone Queensland in May 2021. It was a platform for tailings dam operators to share experiences (good and bad) rather than a technical/engineering focused conference.
With the enormous focus on Tailings Dam Design and Construction over recent years, the challenges facing the operators of tailings dams is often overlooked. The global tailings industry and stakeholders have acknowledged that a step-change is required to eliminate failures such as the events that occurred in Brazil, Mt Polley (Canada) and Cadia. It is noted that there have been 7 additional tailings dam failures since the Brumadinho failure in Brazil on 25 January 2019.
On 25 June 2020, the Global Industry Standard on Tailings Management was endorsed by all stakeholders involved with the Global Tailings Review. This standard establishes robust requirements for the safer management of both existing and new tailings facilities globally. One session of the forum focuses on the operational aspects of the Global Standard.
Tailings management attracts extremely passionate people, and this forum invited like-minded attendees to participate in an open environment to benefit from others’ successes and learnings. This national forum brought together the ‘front line’ of tailings dams to openly discuss their experiences with the outcome of improving awareness of tailings management systems and operational safety.
ANCOLD 2021 Dam Operators Forum Program$50.00
Related products
-
$210.00
Video
Safety Evaluation of Existing Dams Day 3 – MODULES 1-4 – Full Course
Learn moreTechnical Seminar: Safety Evaluation of Existing Dams Day 3 – MODULE 1- 4
Full Course
This seminar emphasizes the importance of periodic evaluation of the safety of existing dams, and provides specific information and guidance on the visual and instrumented monitoring of the various types of dams and their appurtenant structures. Failure modes analysis is stressed as the basis for an effective and efficient monitoring program. At the conclusion of the course, attendees will have a thorough understanding of the procedures and techniques essential to carrying out meaningful dam safety evaluations and monitoring, and should be able to apply these principles to improve their own effectiveness and the effectiveness of their dam safety programs.
Includes access to the following videos:
- Operation and Maintenance Considerations -Chris Danley 25:08
- Inspection of Spillways, Outlet Works, and Mechanical Equipment – Chris Danley 51:08
- Failure Modes Analysis Exercise – Part I. – Gregg Scott 57:30
- Failure Modes Analysis Exercise – Part II. – Gregg Scott 1:18:33
- Evaluation of Facility Emergency Preparedness – Chris Danley 27:59
- Emergency and Special Inspections – Jay Stateler 46:37
- Responding to Dam Incidents – A Case History with Participant Interaction – Jay Stateler 54:14
Learn more -
$250.00
Video
Dam Outlets (May 2015) – MODULES 1-4 – Full Course
Learn moreChoose individual modules or purchase the discounted entire course here.
COURSE OBJECTIVES AND OUTLINE
This short course is designed so that engineers and other dam professionals both young and more experienced will better understand the essential ingredients of investigation, design, operation, maintenance and safety for spillways and outlets for new and existing dams and associated upgrades.While ensuring the basics are properly understood, there will be a strong focus on what is the approaches, issues and risks associated modern dam spillways & outlets requirements – what you need to know, whether a dam owner/manager/operator, consultant, regulator or a professional with a strong interest in dams.
Dam Outlets will look at the other key passage of water passed a dam – outlets. Like spillways it will cover both broad criteria for sound outlets (including intakes) and the specific criteria on the various purposes and types of outlets and in some cases combined with spillways or power generation. Experience of the presenters and case studies will provide a key input into the issues, risks, environmental aspects (such as thermal and fish passage) and overall safety and best practice design and management of outlets. Importantly the presentation will provide an essential insight into the new ANCOLD guideline on outlets currently being prepared.
Module 1 – Welcome & Closure
- Welcome & Introductions – David Watson 3:00
- Seminar Closure – David Watson 6:00
Module 2 – General Layout and Design Principles
- Outlets General functions, Key Components & Layouts – Marius Jonker 21:00
- Outlets Designs & Operational Principles – Intake & outlet Works – Marius Jonker 39:00
- Welcome & Introductions – David Watson 3:00
- Seminar Closure – David Watson 6:00
Module 3 – Outlet Design & Operational Principles
- Outlets Designs & Operational Principles – Flow Control – Glen Hobbs 1:04:00
- Outlets Designs & Operational Principles – Hydraulics – Eric Lesleighter 51:00
- VAG Valves for Bottom Outlets Presentation – Wolfgang Maeck 25:00
- Welcome & Introductions – David Watson 3:00
- Closure – David Watson 6:00
Module 4 – Testing, Inspections, Maintenance & Upgrade
- Outlet Testing, Inspections & Maintenance – Marius Jonker 24:00
- Outlet Testing, Inspections & Maintenance – Glen Hobbs 49:00
- Outlet Rehabilitation, Modernisation & Upgrade – Marius Jonker 20:00
- Outlet Rehabilitation, Modernisation & Upgrade – Glen Hobbs 29:00
- Welcome & Introductions – David Watson 3:00
- Closure – David Watson 6:00
Learn more -
$0.00 - $80.00
Video
Dam Safety Emergency Planning (June 2014) – MODULES 1-5 – Individual Modules
Learn moreChoose the individual modules or purchase the discounted entire course here.
Dam Safety Emergency Planning (June 2014) – MODULES 1 TO 5 (FULL COURSE)
COURSE OBJECTIVES AND OUTLINE
This short course is designed to provide a comprehensive understanding of all aspects of dam safety emergency planning including developing, using, exercising and reviewing dam safety emergency plans.It will begin by briefly reaffirming why dam safety emergency plans are needed and then provide a high level overview of legislative requirements for each State.
Critical elements of dam safety emergency planning and plans will be presented in detail. This will be followed by guidance on how to develop and document dam safety emergency plans.
The seminar also includes modules on training operators and emergency responders in the use of dam safety emergency plans and exercising them so that everyone is confident that the plan will work in a genuine emergency.The presenters will use examples from their experience to illustrate all aspects of dam safety emergency planning and there will be opportunities for delegates to ask questions and share their experiences throughout the day.
Includes access to the following videos:
- Introduction to Dam Safety Emergency Plans – John Tibaldi & Rob Keogh 50:03
- Legislative Framework – Angus Paton & Peter Allen 27:25
- Dam Safety Emergency Plan Critical Elements – Part 1 – Roles and Responsibilities – John Tibaldi 21:10
- Dam Safety Emergency Plan Critical Elements – Part 2 – Emergency Notification, Emergency Incident Triggers and Emergency Incident Actions – John Tibaldi 1:40:38
- Dam Safety Emergency Plan Critical Elements – Part 3 – Dam Failure Inundation Maps, Dam Maps and Plans, and Special Case Considerations – John Tibaldi 29:37
- Dam Safety Emergency Plan Development – Angus Paton 26:42
- Dam Safety Emergency Plan Presentation – Emma Birch 34:56
- Training People to use Dam Safety Emergency Plans – Emma Birch 19:16
- Exercising Dam Safety Emergency Plans – Emma Birch 37:18
- Course Welcome and Opening – Angus Paton 3:40
- Concluding Remarks, Discussion and Close of Day – Angus Paton 9:40
- Tokwe-Mukoshi Dam Wall Slippage on Sunday 9 February 2014 (YouTube) 00:54
Learn more -
$50.00 - $70.00
Video
Safety Evaluation of Existing Dams Day 3 – MODULES 1-4 – Individual Modules
Learn moreChoose the individual modules or purchase the discounted entire course here.
Technical Seminar: Safety Evaluation of Existing Dams Day 3 – MODULE 1- 4
Full Course
This seminar emphasises the importance of periodic evaluation of the safety of existing dams, and provides specific information and guidance on the visual and instrumented monitoring of the various types of dams and their appurtenant structures. Failure modes analysis is stressed as the basis for an effective and efficient monitoring program. At the conclusion of the course, attendees will have a thorough understanding of the procedures and techniques essential to carrying out meaningful dam safety evaluations and monitoring, and should be able to apply these principles to improve their own effectiveness and the effectiveness of their dam safety programs.
Includes access to the following videos:
- Operation and Maintenance Considerations -Chris Danley 25:08
- Inspection of Spillways, Outlet Works, and Mechanical Equipment – Chris Danley 51:08
- Failure Modes Analysis Exercise – Part I. – Gregg Scott 57:30
- Failure Modes Analysis Exercise – Part II. – Gregg Scott 1:18:33
- Evaluation of Facility Emergency Preparedness – Chris Danley 27:59
- Emergency and Special Inspections – Jay Stateler 46:37
- Responding to Dam Incidents – A Case History with Participant Interaction – Jay Stateler 54:14
Learn more -
$50.00 - $70.00
Video
Safety Evaluation of Existing Dams Day 2 (March 2012) – MODULES 1-4 – Individual Modules
Learn moreChoose individual modules or purchase the discounted entire course here.
Technical Seminar: Safety Evaluation of Existing Dams Day 2 (March 2012) – MODULES 1 TO 4
Full course
This seminar emphasises the importance of periodic evaluation of the safety of existing dams, and provides specific information and guidance on the visual and instrumented monitoring of the various types of dams and their appurtenant structures. Failure modes analysis is stressed as the basis for an effective and efficient monitoring program. At the conclusion of the course, attendees will have a thorough understanding of the procedures and techniques essential to carrying out meaningful dam safety evaluations and monitoring, and should be able to apply these principles to improve their own effectiveness and the effectiveness of their dam safety programs.
Includes access to the following videos:
- Seepage Evaluation and Response – Gregg Scott 1:30:02
- Inspection of Embankment Dams, Including Rockfill Dams – Chris Danley 49:42
- Instrumented Monitoring of Embankment Dams, Including Data Evaluation – Jay Stateler 1:55:27
- Inspection of Concrete and Masonry Dams -Chris Danley 37:15
- Instrumented Monitoring of Concrete Dams, Including Data Evaluation – Jay Stateler 36:07
- Concrete Dam Failure Modes – Gregg Scott 59:07
- Spillway Failure Modes and Monitoring – Gregg Scott 46:09
Learn more