Cat McConkey, Zarmina Nasir, Rachel Caoil
The Enlarged Cotter Dam (ECD) is the first major project to be assessed and approved under the new planning regime in the Australian Capital Territory (ACT). ACTEW chose the ECD as its highest priority option in securing Canberra’s water supply for the future because of its relative economic benefit to the community, reliability of water supply, technical feasibility and comparatively low environmental impact.
The planning and construction of large dams has been reduced from a typical 10 plus years to four years in the ACT and surrounds for the ECD. Australian and International Dam design and construction has significantly developed from a time when dam approvals focused on engineering, economics and constructability to now include regulatory planning processes that seek to reconcile environmental, social and economic impacts.
This paper explores and contrasts the experience of securing approvals for the ECD in 2009 to past experiences of dam planning approvals and consultation processes.
Now showing 1-12 of 41 2974:
David Scriven, Errol Beitz, Aaron Elphinstone
The Bowen River Weir is located at AMTD 94.4 km on the Bowen River, some 25 km south of Collinsville in North Queensland. The weir is part of the Bowen/Broken Rivers Water Supply Scheme and it provides a pumping pool for pipelines serving two nearby coal mining developments and a power station, and also acts as a regulator for riparian water users downstream until it meets the Burdekin River.
The weir was constructed in 1982 and incorporated a fishway towards the southern (left) bank, the design of which was based on the old “pool and weir” fish ladder type layout, typical of that era, with 48 separate cells containing partial vertical slots and baffles. This design has since been found to be ineffective for Australian native fish. In addition it was often out of service due to cells becoming filled with river sediment and debris. For these reasons it was decommissioned and made safe in late 2008 on the condition that a new fishway be constructed.
In late 2008 agreement was reached with Fisheries Queensland to install a “fish lock” type fishway at the site. This type of fishway has in recent years proved to be reliable and effective (eg. successful fish locks at Neville Hewitt and Claude Wharton Weirs). The preliminary and then final design was undertaken by SunWater (Infrastructure Development) between September 2008 and March 2009. The construction was undertaken by SunWater direct management, commencing in July 2009 and completed in late 2010.
Bowen River Weir Fishway – Design and Construction
Monique de Moel, A/Professor Jayantha Kodikara, Dr Gamini Adikari
All embankment dams have some seepage as the impounded water seeks paths of least resistance through the dam and its foundation. Seepage must, however, be controlled to prevent internal erosion of the embankment or foundation and avoid damage to surrounding structures. Embankment dams are designed to operate under controlled steady state seepage, which over time may change due to movement in the foundation and the dam, chemical actions and other forms of deterioration. Effective monitoring of seepage within embankment dams is therefore essential in regards to management of dam safety and prevention of failure.
Traditional methods of seepage monitoring have involved measurement or visual monitoring on the downstream side of the dam after the seepage has occurred. Effective, early detection of seepage in embankment dams has been difficult as it originates and develops in the subsurface. Infrared Thermal Imaging is such a technique that is non-contact, non-intrusive, simple and flexible. The analysis draws on the temperature behaviour and the heat capacity of materials within the body of the dam and consequently allows the user to identify and isolate temperature variations along the surface of interest. This paper describes the method, application and feasibility of infrared thermal imaging for the detection of seepage in earth and rockfill embankment dams. The value of this technique as an additional tool in the surveillance of dams is discussed.
Infrared thermal imaging has been in use in other fields of engineering for condition monitoring and defect detection of structures. It has shown great potential in identifying variations in surface characteristics, which may not be evident through visual inspection alone. In this paper, reliability of this technique for seepage detection in embankment dams has been analysed using 8 case studies in order to arrive at a fair understanding of the best conditions under which Infrared Thermal Imaging field inspections should be carried out. The results of field investigations undertaken at these dams suggest that Infrared Thermal Imaging is a useful and effective tool for detection of seepage and an aid in identifying seepage behaviour.
Keywords: Seepage Detection, Infrared Thermal Imaging, Dam Surveillance, Monitoring
Richard Herweynen, Robert Montalvo, John Ager
The choice of materials used in the construction of a dam is one of the most critical decisions in the design process. Our natural behaviour as engineers is to adopt materials which have proven performance, and which conform to Australian or international standards, which sometimes causes us to overlook the specific conditions and demands of the project at hand. In an environment where the majority of concrete produced is for structural purposes, the properties of these concretes is often vastly different to those desired for mass concrete structures such as dams and spillways.
The big question at Wyaralong Dam was could onsite aggregate be used in the Roller Compacted Concrete (RCC)? The Wyaralong Dam is located in the Gatton Sandstone (early Jurassic), predominantly feldspathic to lithic‐feldspathic sandstones with a clay matrix. Early analyses and tests suggested that the Gatton Sandstone was not suitable for RCC aggregate due to a 68% wet/dry strength reduction, high water absorption (5.2 – 7.5%) and petrographic interpretation that clay content was mainly swelling clay, leading to durability concerns.
Due to significant community, safety and cost issues with importing aggregate, Wyaralong Dam Alliance (WDA), during the development of the RCC mix design for Wyaralong Dam, chose to pursue the use of onsite quarried sandstone aggregate instead of importing aggregate. Additional petrographic and XRD analyses and extensive durability tests were undertaken on cores of sandstone and RCC samples, including wet‐dry cycles, soak tests in ethylene glycol, soaks in sodium hydroxide, and heating and cooling cycles. These tests indicated that, if swelling clays are present, they do not impact the durability behavior of the RCC aggregate.
The substantial effort put into testing the sandstone aggregate has paid off for WDA. Not only have the results indicated that the RCC mix performs remarkably well in terms of durability, but the very low modulus of elasticity of the mix has provided exceptional performance in terms of thermal loading; with all the related benefits in reduced restrictions to placement schedule and cooling requirements. Onsite sandstone was not only proven to be a feasible option, it has been demonstrated that it is the best option for the project. Details of the study are provided in this paper.
Keywords: Roller Compacted Concrete (RCC), Sandstone, Aggregate, Clay, Mix, Durability
David Ryan, Sean Fleming
The Connors River Dam and Pipeline Project comprises the construction of a 367,540 ML storage on the Connors River located in central Queensland and a 130 km pipeline capable of delivering annually 49,500 ML of high priority water to the rapidly expanding Central Queensland Coalfields. The dam also has the capacity to supply water for the downstream agricultural sector.
Key outcomes of SunWater’s recent business case investigations included the identification of a strategy that would deliver the project in parallel with the construction programs currently being developed by the coal mining sector, the delivery of a quality product with high certainty cost and the ability to supply water at a commercially attractive rate. Construction activity is currently scheduled to commence in mid 2011, with commissioning of the works early 2014.
The paper outlines the project details, the design features of the dam and pipeline and the contract strategy adopted in an attempt to deliver the project on time and within budget.
Keywords: Roller Compacted Concrete, Early Contractor Involvement, Design and Construction.
Cubit T, Swindon A, Tanner D
Catagunya Dam is located on the Derwent River in Tasmania’s south east. During construction of the dam in early 1960’s 412 post-tensioned anchors were installed, however the integrity of the original anchors can no longer be assured. The stability of the dam was restored between 2008 and 2010 using 92 modern, large diameter, load monitorable and corrosion protected post-tensioned anchors. These are the most highly stressed anchors applied to a dam at this time.
Some of the key construction challenges included installing 53 anchors within an operating spillway, utilising a very limited construction window and replacing severed surface reinforcement using carbon fibre rods.
This paper details how these challenges were resolved and presents a number of innovative solutions developed along the way.