The RCC design review and construction supervision of the 60m high Tannur Dam in Jordan was carried out by GHD, Australia.
The 220,000m3 of RCC was placed during February-December 2000; change to the sloped layer method was made once the dam reached 15m height. It produced a 50% increase in placing rate and a considerable saving in costs.
The use of the method is the first known use outside of China, where it was developed during the construction of the 130m high Jiangya Dam in 1997-8. The sloping of the 300mm thick layers of RCC across the dam from bank to bank at grades between 5-8% ensures subsequent layers of RCC can be placed within the initial set time of the lower layer and hence the RCC is monolithic across the lift joint.
This paper briefly describes the project in Jordan and then gives specific details of the use of the sloped layer method. Typical results from the quality control testing during placement and subsequent coring and testing of the lift joints are also provided. The benefits of its use in adverse climatic conditions, such as extreme heat or rainfall and the ways it can be integrated with forming the upstream-downstream slope are also discussed.
The sloped layer method is a significant advancement, particularly for large structures, where lift joint cohesion, tensile resistance and RCC placing rates are vitally important.
SEQWater is the major supplier of untreated water in bulk to Local Governments and industry in the South East Queensland region of Australia, through ownership of Wivenhoe, Somerset and North Pine Dams. Wivenhoe Dam (Lake Wivenhoe) is located on the Brisbane River in Esk Shire. The storage provides both flood mitigation and water supply storage to Brisbane and Ipswich. The water supply storage capacity at full supply level is 1,160 GL. An additional 1,450 GL of storage above full supply level is used for flood mitigation.
Changes to the estimation of extreme rainfall events has resulted in significant increases in the estimates of the PMF since the original design of Wivenhoe Dam. To upgrade the flood security of Wivenhoe Dam, SEQWater has formed an alliance with Leighton Contractors, Coffey Geosciences, MWH and the NSW Department of Commerce.
This paper details the alliance delivery method, the latest estimates of the PMF based on the GTSMR method and details of the two preferred options being finalised by the Alliance.
N. Vitharana, A. Gower, G. Bell and N. Petrovic
Churchman Brook Dam is a 26m high earthfill dam with a puddle clay core and impounds a reservoir of 2.2GL. Various remedial works have been undertaken since completion of construction in 1928. In September 2000, a sinkhole in the right abutment was observed during a routine dam inspection. Following this incident, detailed site investigations were carried out. These investigations revealed that there are soft zones and possibly voids formed in the upper part of the clay core.
A comprehensive dam safety study and a risk workshop undertaken in 2002/2003 showed the dam to be deficient in aspects associated with piping, spillway adequacy and outlet works condition. A rational geotechnical model was developed for the foundation utilising triaxial test data from 1980s and recent investigations. The existing spillway chute will be upgraded with a concrete liner attached to the existing chute incorporating no-fine concrete as a free-draining medium. This paper presents the various aspects of the remedial works currently being designed.
Investigations of damaging blowback incidents at the headrace tunnel intake to Rangipo Power Station in the Central North Island of New Zealand are described. The blowback phenomenon is explained theoretically based on evaluation of the evidence available from the incidents and information obtained from the literature. A physical hydraulic model study is described in which this explanation of the blowback phenomenon was verified. The model was also used to devise a solution for the blowback problem.
Water supply for irrigation of horticulture and agriculture in New Zealand has gained considerable momentum since the mid 1990’s. The rapid growth of the wine industry in areas such as Marlborough (located at the top of the South Island) and dairy conversions in many areas of South Canterbury are prime examples of the pressure being applied to existing water supplies and sources and the increasing need for new irrigation supplies and security of supply.
The larger irrigation projects of the past were implemented by the government – schemes such as the Rangitata Diversion race and the Lower Waitaki irrigation project both on the east coast of the South Island. The 1990’s and early 2000’s has seen a largely hands off government approach to potential irrigation projects with the shift towards leaving it to market forces to build irrigation schemes. The result has been that due to significant larger project risks and capital cost requirements with often multi party stakeholder groups, only relatively small schemes have been implemented – the Waimakariri irrigation scheme and Opuha irrigation dam are a few examples. However, in recent years with the value of water increasing several significant irrigation projects promoted by private enterprise or progressive district councils with farmer groups are being investigated and a few may be close to implementation.
The recent drought conditions have focussed attention on the need for storages to maintain security of supply and, together with the balance with sustainability, the consenting environment in New Zealand and existing river/aquifer allocations, significant challenges to development are presented.
Specific case examples include the proposed Delta dam near Blenheim being developed by a private group of irrigators and the Bankhouse development being implemented by a private owner in the same Marlborough region.
This paper provides a background to irrigation in the South Island and describes these two proposed schemes and associated storage dams, together with an insight into the key issues related to the proposed projects.
South East Queensland Water Corporation (SEQWater) as owner and operator is proceeding with an upgrade of the flood capacity of Wivenhoe Dam. SEQWater has formed an Alliance with Leighton Contractors, Coffey Geosciences, Montgomery Watson Harza (MWH) and the Department of Commerce-NSW (formerly DPWS, NSW) to upgrade Wivenhoe Dam. This paper presents feasibility level investigation and design activities for an upgrade option, comprising a large labyrinth auxiliary spillway at the right abutment of the dam, for supplementing the existing gated spillway in handling the Probable Maximum Flood (PMF) event. This right abutment auxiliary spillway option incorporates Hydroplus type concrete fuse gates. The investigation so far has proved the technical viability of this option, however, ranking along with the other three options against various criteria will lead to the selection of the preferred upgrade option.