Lake Bellfield is a reserve storage for the Wimmera Mallee Water (WMW) Stock and Domestic System in North Western Victoria, constructed between 1963 and 1967. The dam is located on Fyans Creek approximately 3 km upstream from Halls Gap in an area of high tourist value and is rated in the Extreme category under ANCOLD guidelines. The dam consists of an earth and rockfill embankment 745 m long with a maximum height of 57 metres and retains a reservoir with a storage capacity of 78,500 ML.
Previous studies and a subsequent physical model study confirmed that the existing spillway does not meet the requirements of the current ANCOLD guidelines. The current flood capacity is approximately 40% of the Probable Maximum Flood. A range of potential upgrade options to pass the PMF were evaluated with a 1.9 metre composite earthfill and downstream concrete parapet wall raise in combination with spillway lowering of 3.4 metres selected. Construction of this option was completed in early 2003.
This paper describes the key features of the investigation and design including:
• a physical model study,
• evaluation of various options based on technical, financial, environmental and social criteria,
• design of the earthfill-parapet raise in the limited area available on the crest to provide full filter protection, acceptable short and long term deformations and adequate long term access to the dam and its associated structures, and
• design of the spillway cut including excavation and stabilisation in the very strong and abrasive Grampians Sandstone.
— OR —
State Water # as manager of Keepit Dam has established a comprehensive upgrade project.
A portfolio risk assessment by State Water of its major dams placed Keepit Dam as the highest priority for an upgrade.
While extreme flood and earthquake dam safety are the main drivesr for this upgrade, the opportunity has been taken to integrate other key dam management considerations into the process including environmental improvements, flood mitigation and sustainable regional development.
The dam, which is located on the Namoi River some 45km upstream of Gunnedah, is, in tandem with Split Rock Dam upstream, a vital irrigation water supply for the Namoi Valley region in northern New South Wales.
In considering the most appropriate way of addressing the critical flood safety issue, it became very apparent that the solutions were many and they significantly impacted on the local community. Other important issues such as water quality and flood mitigation, and overall sustainable development in the valley, particularly system water reliability, could influence dam safety solutions and so also needed to be considered as part of the process. As such it was considered imperative that the local community be actively involved in determining both interim and long-term upgrade solutions.
To achieve the best outcome for the region, State Water since mid 2001, has used the community consultation approach to guide the project.
Currently interim works have been completed and long-term options are being evaluated.
An Environmental Impact Statement on the preferred proposal will be undertaken during the later part of 2004 and if approved, all works will be completed by end of 2007.
This paper will highlight our experiences to date including:
• the proposition of an integrated consultative process;
• the background to the project;
• the need for and extent of upgrade;
• an integrated consultation and communication approach including innovative processes and the creation of a high profile Community Reference Panel (CRP) to guide the upgrade project;
• some dos and don’ts from a consultation perspective, for use in other upgrade projects; and
• where to from now.
N.M. Nielsen and L.Casey
An energy and water company spends $8 million on maintenance each year. This work is defined and scheduled through a maintenance management system, part of an enterprise solution that cost the company over $2 million for licence fees, management consulting and installation.
The company has an ageing asset base and has been spending $18 million annually on capital improvements. The work activities are selected to meet safety requirements, enhance reliability, improve plant and upgrade customer service, and are defined, prioritised and scheduled on Word and Excel, which are standard applications on the desks of the company’s engineers and accountants.
This company is a composite (typical) of many in the energy and water business.
The most significant business decisions that owners usually have to make are capital spending commitments to modernise energy and water assets. To be successful, strategies have to be devised to meet the overall strategic objectives of the business, and processes adopted based on a fully functional and integrated asset planning system.
‘Aptus’ is a web-based planning application built specifically for asset intensive businesses. It enables a consistent analytical framework using engineering knowledge and the dam owner’s financial criteria, to provide new perspectives and support strategic planning and decision making with triple bottom line reporting. Aptus is a proven resource to maximize the value of the asset portfolio and sustain the business into the future.
John Phillips, Yu Sheng, Jennifer Henderson
The main iron ore body at Cockatoo Island in the West Kimberleys forms a cliff face plunging steeply into the sea. It was mined by BHP down to low tide level, but the tidal range of 10 metres hampered operations. Being a very pure and sought after ore, various investigations were made to determine methods of extracting the ore below the sea. A coffer dam into the sea was investigated with the conclusion that the soft marine sediments and apparent artesian groundwater in the foundation posed a major risk and high costs.
The mine was sold to a smaller company who proceeded to win useful ore from the island. They also eyed off the undersea ore and approached GHD to use soft ground technology developed for the Derby Tidal Power Project. The soft marine sediments and apparent artesian groundwater conditions were investigated.
The paper describes the design processes involved to achieve dam stability in a space limited by lease boundaries and the desire to maximise the amount of ore that could be accessed. A key to the process was the development of construction techniques and core placement procedures that could cope with the tidal range. Timing aspects were crucial and were controlled by observations of an extensive array of instruments installed for control purposes.
Cold water pollution occurs downstream of many Australian dams when water is released from well below the surface layer of a stratified reservoir during spring and summer. Water temperature can be depressed by 8 °C or more and this may impact negatively upon the survival and growth of native Australian fishes.
After many years in the ‘too hard basket’, mitigation of cold water pollution below dams is receiving increasing attention in Australia. Hume Dam is a case in point. Hume Reservoir, one of the largest irrigation reservoirs in Australia, has a high throughput of water (short residence time) and receives unseasonably cold water from Dartmouth Dam on the Mitta Mitta River and the Snowy Mountains Hydro Scheme on the Murray River.
The maximum possible discharge temperature below Hume Dam may be constrained by geomorphic and climatic features beyond human control. Specifically, the relatively short residence time of water may limit the extent to which it can heat up in the reservoir prior to discharge downstream. Here I present a heat budget for Lake Hume and address the question, “How much can we improve the thermal regime below Hume Dam.”
Tank Hill Reservoir is located approximately 25km north-east of Warrnambool and forms part of the fresh water supply for the town. It was built in the 1930’s by the construction of an earthfill dam across the natural breach of the crater of an extinct volcano. The reservoir is an offline storage with a small natural catchment and has a nominal capacity of 770ML at Full Supply Level (FSL). The reservoir is operated by South West Water Authority (SWWA).
Previous investigations had identified instability issues associated with the dam embankment and the necessity for remedial work to increase the stability of the dam embankment. SKM undertook detailed survey and investigations and the proposed upgrade works include the construction of a downstream stabilising berm incorporating graded filters and a drainage system. The condition of the outlet works was investigated as part of the project, with some of these works found to be in poor condition with a risk to the security of supply, necessitating the design of refurbishment of the outlet works. The degree of siltation of the reservoir was also assessed, and some loss of capacity due to siltation was noted.
Detailed investigations were performed to determine the optimum configuration of the stabilising berm and to locate and test suitable construction materials. The embankment interface filters were designed to satisfy modern filter design criteria and were incorporated in the embankment drainage system. The condition of the outlet works, including the intake standpipe, three offtake valves and the outlet conduit beneath the embankment, were assessed via manual and CCTV inspections. An operation review, incorporating the proposed upgrade works within the framework of ongoing operation of the reservoir for supply to downstream customers was also prepared, as was a construction risk assessment.
This paper will present “extremely useful practical information” for dam design engineers, owners and operators where the whole spectrum of dam safety issues is required for the successful completion of remedial works design and construction.