M G Webby
Investigations of damaging blowback incidents at the headrace tunnel intake to Rangipo Power Station in the Central North Island of New Zealand are described. The blowback phenomenon is explained theoretically based on evaluation of the evidence available from the incidents and information obtained from the literature. A physical hydraulic model study is described in which this explanation of the blowback phenomenon was verified. The model was also used to devise a solution for the blowback problem.
— OR —
Now showing 1-12 of 72 2967:
A survey of spillway gate systems and operations has recently been completed by dam organisations in Nth America, Australia and New Zealand. The survey sought to identify typical arrangements for spillway gate systems and common features pertaining to reliability such as system redundancy, actuation methods and back-up systems, gate and hoist types, remote and local operation, gate testing programmes, and human factors.
Sixteen organizations responded, covering sixty two dams and nearly four hundred gates. This Paper reports on the preliminary analysis of the data, providing an overview of the industries’ approach to spillway gate operation and control.
Tony Qiu and Brian A. Forbes
The RCC design review and construction supervision of the 60m high Tannur Dam in Jordan was carried out by GHD, Australia.
The 220,000m3 of RCC was placed during February-December 2000; change to the sloped layer method was made once the dam reached 15m height. It produced a 50% increase in placing rate and a considerable saving in costs.
The use of the method is the first known use outside of China, where it was developed during the construction of the 130m high Jiangya Dam in 1997-8. The sloping of the 300mm thick layers of RCC across the dam from bank to bank at grades between 5-8% ensures subsequent layers of RCC can be placed within the initial set time of the lower layer and hence the RCC is monolithic across the lift joint.
This paper briefly describes the project in Jordan and then gives specific details of the use of the sloped layer method. Typical results from the quality control testing during placement and subsequent coring and testing of the lift joints are also provided. The benefits of its use in adverse climatic conditions, such as extreme heat or rainfall and the ways it can be integrated with forming the upstream-downstream slope are also discussed.
The sloped layer method is a significant advancement, particularly for large structures, where lift joint cohesion, tensile resistance and RCC placing rates are vitally important.
Cairn Curran Dam is a 44m high zoned earthfill embankment located near Bendigo in central
Victoria. The dam is owned and operated by Goulburn-Murray Water.
A risk assessment had identified that the junction between the embankment and spillway wall was a weakness in regard to the potential for piping. Initial geotechnical investigations indicated a softened zone adjacent to the foundation.
The conceptual upgrade design was to excavate the downstream slope and place filter material and a rockfill weighting berm. A 2-D slope stability analysis gave unacceptably low factors of safety for this excavation. The three dimensional nature of the embankment/spillway interface and excavation geometry was identified as an important factor in the upgrade design.
A detailed geotechnical assessment was undertaken and a geotechnical model developed that
accounted for potential softened zones adjacent to the spillway wall, along the foundation, and within the embankment.
A 3-D limit equilibrium slope stability program was utilised to analyse the 3-D factors of safety. The
program employed an extension of Bishop’s method of slices to a 3-D ‘method of columns’. A 3-D
finite element analysis was also undertaken to estimate likely deformations of the embankment and cut slope during construction.
The development of the geotechnical model and subsequent analysis allowed the upgrade works to be undertaken with confidence.
Bellfield dam is a 78,500 ML drought reserve storage for the Wimmera-Mallee Stock and Domestic System. The 800m long by 57m high zoned earth and rockfill dam is located on Fyans Creek upstream of the Grampians tourist town of Halls Gap in north western Victoria. The dam was built in the period 1963-67. Later in 2002-03 as part of a flood security upgrading (FSU) program, had its rock chute spillway deepened by 3.4m and its embankment crest raised by 1.9m to withstand a PMF.
To manage the FSU’s likely construction constraints and risks, Wimmera Mallee Water’s Headworks Group successfully undertook the upgrading by a mix of schedule of rates contracts and direct management.
This paper complements a companion paper by WMW’s design consultants, URS and describes why and how direct management was used, plus unconventional aspects of spillway deepening and the raising of a narrow dam crest with earthworks and a pre-cast parapet wall.
Keywords: Drill and blast, pre-cast parapet wall, narrow embankment crest, direct management, construction.
Lake Bellfield is a reserve storage for the Wimmera Mallee Water (WMW) Stock and Domestic System in North Western Victoria, constructed between 1963 and 1967. The dam is located on Fyans Creek approximately 3 km upstream from Halls Gap in an area of high tourist value and is rated in the Extreme category under ANCOLD guidelines. The dam consists of an earth and rockfill embankment 745 m long with a maximum height of 57 metres and retains a reservoir with a storage capacity of 78,500 ML.
Previous studies and a subsequent physical model study confirmed that the existing spillway does not meet the requirements of the current ANCOLD guidelines. The current flood capacity is approximately 40% of the Probable Maximum Flood. A range of potential upgrade options to pass the PMF were evaluated with a 1.9 metre composite earthfill and downstream concrete parapet wall raise in combination with spillway lowering of 3.4 metres selected. Construction of this option was completed in early 2003.
This paper describes the key features of the investigation and design including:
• a physical model study,
• evaluation of various options based on technical, financial, environmental and social criteria,
• design of the earthfill-parapet raise in the limited area available on the crest to provide full filter protection, acceptable short and long term deformations and adequate long term access to the dam and its associated structures, and
• design of the spillway cut including excavation and stabilisation in the very strong and abrasive Grampians Sandstone.