In September 2000, pressures being monitored in a geological fracture beneath Arapuni Dam were found to be rising significantly, indicating that a deteriorating condition was developing in the foundation. Two boreholes drilled in 1995 had intersected high water pressures within the fracture in an area close to the downstream face of the dam, posing a risk of major leakage developing from where the fracture day-lighted downstream of the dam. Lumps of clay, bitumen and lake biota, including snails and small fish, were identified discharging from the boreholes, indicating that a significant leakage path had developed. Detailed investigations, the subject of this paper, were carried out from September 2000 to confirm the extent and nature of the deterioration. A range of groundwater investigation techniques and tools were used, while the reservoir remained full, to identify the source of the leak and confirm the path it took. The investigations culminated in development of a groundwater model that described the seepage behaviour in the dam foundation. Based on the investigation information gathered, the foundation fracture bearing the high water pressure was successfully grouted in December 2001 without lowering the reservoir.
Now showing 1-12 of 72 2967:
A survey of spillway gate systems and operations has recently been completed by dam organisations in Nth America, Australia and New Zealand. The survey sought to identify typical arrangements for spillway gate systems and common features pertaining to reliability such as system redundancy, actuation methods and back-up systems, gate and hoist types, remote and local operation, gate testing programmes, and human factors.
Sixteen organizations responded, covering sixty two dams and nearly four hundred gates. This Paper reports on the preliminary analysis of the data, providing an overview of the industries’ approach to spillway gate operation and control.
The RCC design review and construction supervision of the 60m high Tannur Dam in Jordan was carried out by GHD, Australia.
The 220,000m3 of RCC was placed during February-December 2000; change to the sloped layer method was made once the dam reached 15m height. It produced a 50% increase in placing rate and a considerable saving in costs.
The use of the method is the first known use outside of China, where it was developed during the construction of the 130m high Jiangya Dam in 1997-8. The sloping of the 300mm thick layers of RCC across the dam from bank to bank at grades between 5-8% ensures subsequent layers of RCC can be placed within the initial set time of the lower layer and hence the RCC is monolithic across the lift joint.
This paper briefly describes the project in Jordan and then gives specific details of the use of the sloped layer method. Typical results from the quality control testing during placement and subsequent coring and testing of the lift joints are also provided. The benefits of its use in adverse climatic conditions, such as extreme heat or rainfall and the ways it can be integrated with forming the upstream-downstream slope are also discussed.
The sloped layer method is a significant advancement, particularly for large structures, where lift joint cohesion, tensile resistance and RCC placing rates are vitally important.
Dam safety emergency plans (DSEPs) are typically produced for individual dams. For owners of a large portfolio of dams, this approach creates document control difficulties, requires excessive time and effort and can lead to confusion when a single emergency affects multiple dams having individual DSEPs. Hydro Tasmania has developed a single DSEP which is applicable to its portfolio of 54 referable dams. The DSEP contains generic emergency response procedures, is applicable to a whole range of generic dam safety incidents, uses a simple colour-coded flowchart-action list format, has a two-stage emergency response, retains all necessary dam-specific information and can be easily adapted to any organisational structure. This approach was found to have benefits in document control, flexibility in the management of the emergency response and short lead time in terms of having DSEPs which cover an entire portfolio of dams.
The Diavik Dyke was constructed in 2001/2 in a major sub-Arctic lake in Canada’s Northwest Territories, to permit an open-pit diamond mining operation. The dyke, 3.9km long, was built in water up to 20 metres deep in a period of 17 months. For ten months of this period the lake was frozen. The project was notable for the extreme climate, discontinuous permafrost in the dyke foundations, very difficult logistics and the exceptional environmental constraints.
Project economics dictated a short construction period to permit the early generation of revenue from the mine. To confidently deliver a secure dyke within the time frame, the world’s most technologically advanced cut-off wall equipment was designed and fabricated in Germany.
This paper provides an overview of the dyke and focuses in more detail on the specialty equipment used for the cut-off wall and foundation treatment.
N. Vitharana, A. Gower, G. Bell and N. Petrovic
Churchman Brook Dam is a 26m high earthfill dam with a puddle clay core and impounds a reservoir of 2.2GL. Various remedial works have been undertaken since completion of construction in 1928. In September 2000, a sinkhole in the right abutment was observed during a routine dam inspection. Following this incident, detailed site investigations were carried out. These investigations revealed that there are soft zones and possibly voids formed in the upper part of the clay core.
A comprehensive dam safety study and a risk workshop undertaken in 2002/2003 showed the dam to be deficient in aspects associated with piping, spillway adequacy and outlet works condition. A rational geotechnical model was developed for the foundation utilising triaxial test data from 1980s and recent investigations. The existing spillway chute will be upgraded with a concrete liner attached to the existing chute incorporating no-fine concrete as a free-draining medium. This paper presents the various aspects of the remedial works currently being designed.