Bill Hakin, Peter Buchanan, Doug Connors, Darren Loidl
To allow greater flexibility in their generation and hence a better response to the peaks in electricity demand, Southern Hydro decided to increase the Full Supply Level of Dartmouth Regulatory Dam by 3.5m using labyrinth Fusegates.
The Regulating Dam is located on the Mitta Mitta River, approximately 8 km downstream of Dartmouth Dam. It is a 23 m high concrete gravity structure with a 60 m long central spillway section. The dam forms the storage required for regulating releases from the Dartmouth Power Station back to the Mitta Mitta River, so as to satisfy environmental requirements.
Although this is the second Fusegate project in Australia it is unique in that difficult access conditions determined that construction in mild steel would be the most appropriate. Initial civil works involved construction of a flat sill to replace the Ogee spillway crest so that it could support the Fusegates. The installation contractor devised an ingenious method for installing the huge structures over the top of the gate-house which blocks direct access to the spillway. Design was very much undertaken with the installation method in mind to ensure a high quality project with minimum contractual risk.
This paper discusses the construction stage of this very interesting spillway modification.
There is a widespread perception among dam engineers that tree root invasion occasions a very serious threat to embankment dams by virtue of its potential to initiate piping failure, with appropriate action invariably recommended. Remedial works can, on occasions, be extensive.
While the principle is ostensibly plausible and scarcely challenged, there has never been, to the Author’s knowledge, a satisfactory investigation to establish any credible scientific basis for it. One case that has attracted some attention in literature (by virtue of the extent of the investigation undertaken), viz a piping accident at Yan Yean Dam, is critically reviewed to show that the accepted view on the role of tree roots in this incident is less than satisfactory. In the course of this review, two physical Laws of Piping are proposed, and applied both to this case and to another nearby Melbourne Water dam that also has a history of piping.
Whilst the consequences of piping in a major dam are such that risk from this source must be kept to a very low level, it is concluded here that piping risk arising from tree root invasion has been considerably overstated and that a more balanced assessment is necessary before determining what, if any, action is required.
Many dam structures in Australia were designed and built in the 1950s and 60s with limited hydrological information. As a result existing spillway structures are under-sized for today’s revised probable maximum floods (PMF). Potential problems such as the generation of excessive negative pressure over spillway crest under increased flood condition could be encountered. This may cause instability or cavitation damage to the spillway. The raised flow profile may also have adverse impacts on crest bridges and gate structures.
Historically, physical models have been constructed in hydraulic laboratories to study these behaviours, but they are expensive, time-consuming and there are many difficulties associated with scaling effects. Today, with the use of high-performance computers and more efficient computational fluid dynamics (CFD) codes, the behaviour of hydraulic structures can be investigated numerically in reasonable time and expense.
This paper describes the two- and three-dimensional CFD modelling of spillway behaviour under rising flood levels. The results have been validated against published data and good agreement was obtained. The technique has been applied to investigate several spillway structures in Australia.
An energy and water company spends $8 million on maintenance each year. This work is defined and scheduled through a maintenance management system, part of an enterprise solution that cost the company over $2 million for licence fees, management consulting and installation.
The company has an ageing asset base and has been spending $18 million annually on capital improvements. The work activities are selected to meet safety requirements, enhance reliability, improve plant and upgrade customer service, and are defined, prioritised and scheduled on Word and Excel, which are standard applications on the desks of the company’s engineers and accountants.
This company is a composite (typical) of many in the energy and water business.
The most significant business decisions that owners usually have to make are capital spending commitments to modernise energy and water assets. To be successful, strategies have to be devised to meet the overall strategic objectives of the business, and processes adopted based on a fully functional and integrated asset planning system.
‘Aptus’ is a web-based planning application built specifically for asset intensive businesses. It enables a consistent analytical framework using engineering knowledge and the dam owner’s financial criteria, to provide new perspectives and support strategic planning and decision making with triple bottom line reporting. Aptus is a proven resource to maximize the value of the asset portfolio and sustain the business into the future.
The disused Stapylton quarry is located in the suburbs of the Queensland Gold Coast. Gold Coast City Council, as part of the Northern Wastewater Strategy, has included the use of the quarry for storage and re-distribution of reclaimed water from the Beenleigh Water Reclamation Facility (WRF) to the downstream cane farmlands. A comprehensive EIS has been produced, which has strict water quality requirements for the quarry environs as well as the reservoir and outflow. This paper presents the background to the Northern Wastewater Strategy, the requirements for the Stapylton reservoir and the analysis performed for the detailed design of the embankment dam and the inlet bubble plume destratification system. The modelling of the destratification system was undertaken using the programme DYnamic REservoir Simulation Model (DYRESM) coupled with Computational Aquatic Ecosystems DYnamics Model (CAEDYM). The outcomes and implications of the modelling for the design and system operation including environmental monitoring are discussed.
Suzie Gaynor, Jocelyn Potts, David Watson
State Water # as manager of Keepit Dam has established a comprehensive upgrade project.
A portfolio risk assessment by State Water of its major dams placed Keepit Dam as the highest priority for an upgrade.
While extreme flood and earthquake dam safety are the main drivesr for this upgrade, the opportunity has been taken to integrate other key dam management considerations into the process including environmental improvements, flood mitigation and sustainable regional development.
The dam, which is located on the Namoi River some 45km upstream of Gunnedah, is, in tandem with Split Rock Dam upstream, a vital irrigation water supply for the Namoi Valley region in northern New South Wales.
In considering the most appropriate way of addressing the critical flood safety issue, it became very apparent that the solutions were many and they significantly impacted on the local community. Other important issues such as water quality and flood mitigation, and overall sustainable development in the valley, particularly system water reliability, could influence dam safety solutions and so also needed to be considered as part of the process. As such it was considered imperative that the local community be actively involved in determining both interim and long-term upgrade solutions.
To achieve the best outcome for the region, State Water since mid 2001, has used the community consultation approach to guide the project.
Currently interim works have been completed and long-term options are being evaluated.
An Environmental Impact Statement on the preferred proposal will be undertaken during the later part of 2004 and if approved, all works will be completed by end of 2007.
This paper will highlight our experiences to date including: