John Phillips, Yu Sheng, Jennifer Henderson
The main iron ore body at Cockatoo Island in the West Kimberleys forms a cliff face plunging steeply into the sea. It was mined by BHP down to low tide level, but the tidal range of 10 metres hampered operations. Being a very pure and sought after ore, various investigations were made to determine methods of extracting the ore below the sea. A coffer dam into the sea was investigated with the conclusion that the soft marine sediments and apparent artesian groundwater in the foundation posed a major risk and high costs.
The mine was sold to a smaller company who proceeded to win useful ore from the island. They also eyed off the undersea ore and approached GHD to use soft ground technology developed for the Derby Tidal Power Project. The soft marine sediments and apparent artesian groundwater conditions were investigated.
The paper describes the design processes involved to achieve dam stability in a space limited by lease boundaries and the desire to maximise the amount of ore that could be accessed. A key to the process was the development of construction techniques and core placement procedures that could cope with the tidal range. Timing aspects were crucial and were controlled by observations of an extensive array of instruments installed for control purposes.
Now showing 1-12 of 72 2967:
M. Barker, T. Burt, K. McCallum-Gaul, Dr M. Barry
The disused Stapylton quarry is located in the suburbs of the Queensland Gold Coast. Gold Coast City Council, as part of the Northern Wastewater Strategy, has included the use of the quarry for storage and re-distribution of reclaimed water from the Beenleigh Water Reclamation Facility (WRF) to the downstream cane farmlands. A comprehensive EIS has been produced, which has strict water quality requirements for the quarry environs as well as the reservoir and outflow. This paper presents the background to the Northern Wastewater Strategy, the requirements for the Stapylton reservoir and the analysis performed for the detailed design of the embankment dam and the inlet bubble plume destratification system. The modelling of the destratification system was undertaken using the programme DYnamic REservoir Simulation Model (DYRESM) coupled with Computational Aquatic Ecosystems DYnamics Model (CAEDYM). The outcomes and implications of the modelling for the design and system operation including environmental monitoring are discussed.
J.H. Green, D.J. Walland, N. Nandakumar
The Bureau of Meteorology has recently revised the Probable Maximum Precipitation (PMP) estimates for the Generalised Tropical Storm Method (GTSM) region of Australia. The revision process has involved the application of the more technically rigorous Generalised Southeast Australia Method (GSAM) that was previously developed for the southern part of Australia to a much larger data set of severe tropical storms. This has generally lead to an increase in the total GTSM PMP depths with a resultant increase in the Probable Maximum Precipitation Design Flood (PMPDF) and the Probable Maximum Flood (PMF).
In addition, the revision process has produced significant modifications to the temporal and spatial patterns adopted when applying the PMP depths to a dam’s catchment and these changes have also generally lead to increases in the resultant floods.
This paper discusses the rationale behind the increases in PMP depths and changes in the associated temporal and spatial patterns and presents the justification for the adoption of these more scientifically defensible estimates.
The application of the revised PMP estimates to the Keepit Dam catchment in northern NSW is presented and a comparison between the PMPDF and PMF estimates based on the original GTSM and the revised GTSM (GTSMR) made for this specific case study.
Cold water pollution occurs downstream of many Australian dams when water is released from well below the surface layer of a stratified reservoir during spring and summer. Water temperature can be depressed by 8 °C or more and this may impact negatively upon the survival and growth of native Australian fishes.
After many years in the ‘too hard basket’, mitigation of cold water pollution below dams is receiving increasing attention in Australia. Hume Dam is a case in point. Hume Reservoir, one of the largest irrigation reservoirs in Australia, has a high throughput of water (short residence time) and receives unseasonably cold water from Dartmouth Dam on the Mitta Mitta River and the Snowy Mountains Hydro Scheme on the Murray River.
The maximum possible discharge temperature below Hume Dam may be constrained by geomorphic and climatic features beyond human control. Specifically, the relatively short residence time of water may limit the extent to which it can heat up in the reservoir prior to discharge downstream. Here I present a heat budget for Lake Hume and address the question, “How much can we improve the thermal regime below Hume Dam.”
Sydney Catchment Authority (SCA) has been progressively enhancing its asset management capability for dams and other headworks infrastructure since 1999. A key to the development of the integrated asset management system has been the application of asset condition assessment and Failure Modes, Effects and Criticality Analysis (FMECA) across the water supply mechanical and electrical assets. This has provided vital data necessary to:
• Identify all the mechanical and electrical assets
• Update the computerised maintenance management system database (MAXIMO)
• Determine asset criticality against a range of factors
• Allow review and rationalisation of maintenance work plans
• Upgrade the System Management Plans
Asset management features as a key result area within the SCA’s Corporate Business Plan. Integrated asset management is achieved by cascading corporate outcomes, strategies, objectives and responsibilities down through divisional and team work plans to individual staff members. This paper covers a range of issues that have a bearing on the day-to-day integrity of the infrastructure required to deliver bulk raw water to the SCA’s customers.
The management of maintenance at Warragamba Dam is used as an example to demonstrate the effectiveness and practicality of the application of the contemporary asset management system.
South East Queensland Water Corporation (SEQWater) as owner and operator is proceeding with an upgrade of the flood capacity of Wivenhoe Dam. SEQWater has formed an Alliance with Leighton Contractors, Coffey Geosciences, Montgomery Watson Harza (MWH) and the Department of Commerce-NSW (formerly DPWS, NSW) to upgrade Wivenhoe Dam. This paper presents feasibility level investigation and design activities for an upgrade option, comprising a large labyrinth auxiliary spillway at the right abutment of the dam, for supplementing the existing gated spillway in handling the Probable Maximum Flood (PMF) event. This right abutment auxiliary spillway option incorporates Hydroplus type concrete fuse gates. The investigation so far has proved the technical viability of this option, however, ranking along with the other three options against various criteria will lead to the selection of the preferred upgrade option.