John Phillips, Yu Sheng, Jennifer Henderson
The main iron ore body at Cockatoo Island in the West Kimberleys forms a cliff face plunging steeply into the sea. It was mined by BHP down to low tide level, but the tidal range of 10 metres hampered operations. Being a very pure and sought after ore, various investigations were made to determine methods of extracting the ore below the sea. A coffer dam into the sea was investigated with the conclusion that the soft marine sediments and apparent artesian groundwater in the foundation posed a major risk and high costs.
The mine was sold to a smaller company who proceeded to win useful ore from the island. They also eyed off the undersea ore and approached GHD to use soft ground technology developed for the Derby Tidal Power Project. The soft marine sediments and apparent artesian groundwater conditions were investigated.
The paper describes the design processes involved to achieve dam stability in a space limited by lease boundaries and the desire to maximise the amount of ore that could be accessed. A key to the process was the development of construction techniques and core placement procedures that could cope with the tidal range. Timing aspects were crucial and were controlled by observations of an extensive array of instruments installed for control purposes.
David Ho, Karen Boyes, Shane Donohoo and Brian Cooper
Many dam structures in Australia were designed and built in the 1950s and 60s with limited hydrological information. As a result existing spillway structures are under-sized for today’s revised probable maximum floods (PMF). Potential problems such as the generation of excessive negative pressure over spillway crest under increased flood condition could be encountered. This may cause instability or cavitation damage to the spillway. The raised flow profile may also have adverse impacts on crest bridges and gate structures.
Historically, physical models have been constructed in hydraulic laboratories to study these behaviours, but they are expensive, time-consuming and there are many difficulties associated with scaling effects. Today, with the use of high-performance computers and more efficient computational fluid dynamics (CFD) codes, the behaviour of hydraulic structures can be investigated numerically in reasonable time and expense.
This paper describes the two- and three-dimensional CFD modelling of spillway behaviour under rising flood levels. The results have been validated against published data and good agreement was obtained. The technique has been applied to investigate several spillway structures in Australia.
John Grimston, Robin Dawson, Maurice Fraser
Water supply for irrigation of horticulture and agriculture in New Zealand has gained considerable momentum since the mid 1990’s. The rapid growth of the wine industry in areas such as Marlborough (located at the top of the South Island) and dairy conversions in many areas of South Canterbury are prime examples of the pressure being applied to existing water supplies and sources and the increasing need for new irrigation supplies and security of supply.
The larger irrigation projects of the past were implemented by the government – schemes such as the Rangitata Diversion race and the Lower Waitaki irrigation project both on the east coast of the South Island. The 1990’s and early 2000’s has seen a largely hands off government approach to potential irrigation projects with the shift towards leaving it to market forces to build irrigation schemes. The result has been that due to significant larger project risks and capital cost requirements with often multi party stakeholder groups, only relatively small schemes have been implemented – the Waimakariri irrigation scheme and Opuha irrigation dam are a few examples. However, in recent years with the value of water increasing several significant irrigation projects promoted by private enterprise or progressive district councils with farmer groups are being investigated and a few may be close to implementation.
The recent drought conditions have focussed attention on the need for storages to maintain security of supply and, together with the balance with sustainability, the consenting environment in New Zealand and existing river/aquifer allocations, significant challenges to development are presented.
Specific case examples include the proposed Delta dam near Blenheim being developed by a private group of irrigators and the Bankhouse development being implemented by a private owner in the same Marlborough region.
This paper provides a background to irrigation in the South Island and describes these two proposed schemes and associated storage dams, together with an insight into the key issues related to the proposed projects.
M G Webby
Investigations of damaging blowback incidents at the headrace tunnel intake to Rangipo Power Station in the Central North Island of New Zealand are described. The blowback phenomenon is explained theoretically based on evaluation of the evidence available from the incidents and information obtained from the literature. A physical hydraulic model study is described in which this explanation of the blowback phenomenon was verified. The model was also used to devise a solution for the blowback problem.
Phillip Jordan, Rory Nathan, L. Mittiga1 M. Pearse, and Brian Taylor
There are many important dams and other structures on catchments smaller than 1000 km² with response times less than 24 hours, however these catchments have been largely overlooked in previous research into large and extreme floods. This paper is an initial step in “catching up” design practice for short duration rainfall events to the current best practice that is available for estimation of floods from rainfall events with durations of 24 hours and greater.
Two issues are specifically addressed in this paper. Firstly, a regional analysis of short duration rainfall depths is conducted to extend the frequency curve beyond an AEP of 1 in 100. Rainfall frequency curves are estimated for durations between 0.5 and 12 hours, using data from ten pluviograph sites around Australia. Secondly, sets of temporal patterns are derived that could be useful in joint probability analysis of short duration rainfall events. The effects of these new rainfall depths and temporal patterns on flood frequency curves are tested by applying them to rainfall-runoff routing models for three dams with small catchment areas.
SEQWater is the major supplier of untreated water in bulk to Local Governments and industry in the South East Queensland region of Australia, through ownership of Wivenhoe, Somerset and North Pine Dams. Wivenhoe Dam (Lake Wivenhoe) is located on the Brisbane River in Esk Shire. The storage provides both flood mitigation and water supply storage to Brisbane and Ipswich. The water supply storage capacity at full supply level is 1,160 GL. An additional 1,450 GL of storage above full supply level is used for flood mitigation.
Changes to the estimation of extreme rainfall events has resulted in significant increases in the estimates of the PMF since the original design of Wivenhoe Dam. To upgrade the flood security of Wivenhoe Dam, SEQWater has formed an alliance with Leighton Contractors, Coffey Geosciences, MWH and the NSW Department of Commerce.
This paper details the alliance delivery method, the latest estimates of the PMF based on the GTSMR method and details of the two preferred options being finalised by the Alliance.