The main iron ore body at Cockatoo Island in the West Kimberleys forms a cliff face plunging steeply into the sea. It was mined by BHP down to low tide level, but the tidal range of 10 metres hampered operations. Being a very pure and sought after ore, various investigations were made to determine methods of extracting the ore below the sea. A coffer dam into the sea was investigated with the conclusion that the soft marine sediments and apparent artesian groundwater in the foundation posed a major risk and high costs.
The mine was sold to a smaller company who proceeded to win useful ore from the island. They also eyed off the undersea ore and approached GHD to use soft ground technology developed for the Derby Tidal Power Project. The soft marine sediments and apparent artesian groundwater conditions were investigated.
The paper describes the design processes involved to achieve dam stability in a space limited by lease boundaries and the desire to maximise the amount of ore that could be accessed. A key to the process was the development of construction techniques and core placement procedures that could cope with the tidal range. Timing aspects were crucial and were controlled by observations of an extensive array of instruments installed for control purposes.
The paper highlights the fundamental importance of correct data selection and storage for the quality of Asset Management demanded for today’s water industry infrastructure.
In developing this theme, the concept of Risk driven maintenance is introduced to focus attention on those issues that not only the identify the appropriate data to be collected and stored, but also, by way of illustrated examples, the direct relevance and application of reliability engineering principles in Risk Analysis.
The author’s principle objective is to demonstrate that the historical data on reliability, condition and performance must be supported with detailed costing information if any worthwhile outcomes are to be forthcoming from analysis.
A survey of spillway gate systems and operations has recently been completed by dam organisations in Nth America, Australia and New Zealand. The survey sought to identify typical arrangements for spillway gate systems and common features pertaining to reliability such as system redundancy, actuation methods and back-up systems, gate and hoist types, remote and local operation, gate testing programmes, and human factors.
Sixteen organizations responded, covering sixty two dams and nearly four hundred gates. This Paper reports on the preliminary analysis of the data, providing an overview of the industries’ approach to spillway gate operation and control.
Assessment of dam safety requires estimates of extreme rainfall together with the temporal and spatial distributions of extreme rainfall. In order to satisfy dam safety requirements for dams in the west coast of Tasmania, the Bureau of Meteorology has developed the method of storm transposition and maximisation for application in this region.
Daily, as well as continuously recorded rainfall data for all Bureau of Meteorology and Hydro Tasmania sites in western Tasmania have been analysed and the most outstanding rainfall events over one, two and three-day durations in the region have been identified. Meteorological analysis of these events reveals that the most significant rainfall events in the west coast of Tasmania are caused by the passage of fronts, which are sometimes associated with an intense extratropical cyclone, with a westerly or southwesterly airstream.
A database of isohyetal analyses of the most significant rainfall events in western Tasmania has been established. These can be used either ‘in situ’ or transposed to estimate mean catchment rainfall. Storm dewpoint temperatures for the purpose of moisture maximisation have been determined.
Cumulative and incremental three-hourly temporal distributions for sites having continuous rainfall data or three-hourly meteorological observations have been constructed and design temporal distributions of extreme rainfall have been derived.
An objective method for adjusting for differences in the topography between the storm and target locations is proposed
Yarrawonga Weir was constructed in the 1930’s and is located on the Victoria / New South Wales border, between the towns of Yarrawonga and Mulwala. Dam safety investigations revealed that the main embankment was founded on a very loose layer of sand that would be vulnerable to liquefaction even under the operating basis earthquake
This paper details the statutory approvals and community consultation processes that were employed and the benefits that they provided to the $13 million remedial works project.
Local communities can assist, be neutral or obstruct a project. By engaging the community in a positive manner it is possible to deliver excellent results without increasing costs.
Many dam structures in Australia were designed and built in the 1950s and 60s with limited hydrological information. As a result existing spillway structures are under-sized for today’s revised probable maximum floods (PMF). Potential problems such as the generation of excessive negative pressure over spillway crest under increased flood condition could be encountered. This may cause instability or cavitation damage to the spillway. The raised flow profile may also have adverse impacts on crest bridges and gate structures.
Historically, physical models have been constructed in hydraulic laboratories to study these behaviours, but they are expensive, time-consuming and there are many difficulties associated with scaling effects. Today, with the use of high-performance computers and more efficient computational fluid dynamics (CFD) codes, the behaviour of hydraulic structures can be investigated numerically in reasonable time and expense.
This paper describes the two- and three-dimensional CFD modelling of spillway behaviour under rising flood levels. The results have been validated against published data and good agreement was obtained. The technique has been applied to investigate several spillway structures in Australia.